Sideroll Frame Bag

P1020990.JPG
P1020991.JPG
P1020993.JPG
P1020999.JPG
P1030002.JPG
P1020995.JPG
P1020990.JPG
P1020991.JPG
P1020993.JPG
P1020999.JPG
P1030002.JPG
P1020995.JPG

Sideroll Frame Bag

from 200.00

*Please allow 6-8 weeks for your order to be made.

For a lightweight bikepacking setup, framebags are a must have. They utilize the empty space within the triangle so that users can avoid extra racks. For over-packers, framebags provide storage that won't throw off the center of gravity. The Outer Shell framebag features a sideroll main entrance that is much more durable than a traditional zipper. The wide opening gives full access to the entire bag, including the bottom! A padded perimeter assures your stuff won't rattle against the frame. Every bag is custom sized. Please read the instructions for providing a frame tracing. Your bike should be fully built before proceeding. 

*Please allow 6-8 weeks for your order to be made.

Color:
Quantity:
Add To Cart

Features

  • Side roll closure (no zippers to fail)
  • Velcro sealed opening
  • External pocket (fits hydration bladder)
  • Custom fitted
  • Padded Ballistic Nylon fabric at all frame interfaces
  • PU coated Cordura main fabric (water resistant)

 

Providing a frame tracing 

Things you'll need:

  • A sheet of poster board or any frame sized piece of paper (sometimes an opened up grocery bag works)
  • Masking tape
  • Sharpie marker
  1. Trim poster/paper to approximate size of frame triangle
  2. Tape poster/paper to frame triangle so that its nice and flat
  3. Trace interior of triangle.  For straight tubes you can make marks at the tube junctions, then use a straight edge to connect the marks. Any curvature must be traced (You will need to angle your marker to get an exact marking/tracing)
  4. Mark and label ALL water bottle bosses and cable stops (on the inside and outside of frame triangle)
  5. Mark and label where the front derailleur clamp or braze on is located
  6. Specify the year, make, model, and size of the frame (if known)
  7. Provide your name and contact information on the pattern

 

HTML Comment Box is loading comments...